EN 
RU 
Plaster glass mesh MASTER 320 is a fiberglass mesh with increased tear resistance. It is used in places of increased load on the plaster layer.
Plaster glass mesh MASTER 320 is used for:
1. For reinforced reinforcement of the base plaster layer on the basement and ground floors and parking areas;
2. For reinforcing the plaster layer with subsequent finishing with heavy materials – clinker tiles, natural stone, etc.;
3. For reinforcing the plaster layer in exterior insulation systems of building facades;
4. For reinforcing and repairing the plaster protective layer inside and outside buildings, preventing cracking.
The MASTER glass mesh is certified for compliance with the requirements of the standards:
- GOST 55225-2012 "Fiberglass facade reinforcing alkali-resistant mesh", Russian Federation;
- EAD 04001600-0404 «Glass fiber mesh for reinforcement of cement-based renderings».
Technical characteristics of the MASTER 320 glass mesh
Composition | Breaking loads, N/5cm | Cell size, mm | Elongation at max. load, % | Roll size, m | Number of rolls per pallet 1*1.2 m |
|---|---|---|---|---|---|
Glassmaking Polymer impregnation | 3600/3600 | 10x10 | 4 | 1x25 May change at the request of the client | 40 |
Advantages of the MASTER 320 masonry glass mesh:
- stabilizes the geometry of cells;
- increases the strength characteristics of the reinforced layer due to diagonal stability;
- retains reinforcing properties in an aggressive alkaline environment.
Plaster glass mesh MASTER 320 is made of fiberglass and polymer impregnation, and is absolutely safe for human health. The MASTER 320 glass mesh can be custom-made with different winding and width, with logo application and painting of the canvas in the desired color.
