Grids are used for facade insulation: glass, steel, basalt. Advantages of glass mesh in comparison with steel:

Grids are used for facade insulation: glass, steel, basalt. Advantages of glass mesh in comparison with steel:

- much cheaper. In the facade insulation system, glass mesh takes 5-6% of the cost, steel mesh – 20%.

- lightness;

- strength;

- does not rust.

The plaster composition is an active alkaline medium that affects the mesh, so one of the main qualities of the mesh should be alkali resistance. The mesh is used during plastering to increase the thermal insulation properties of the wall, heat loss through the wall is reduced. In the absence of a grid in this design, the possibility of cracking or deformation of the plaster layer increases to 70%. Materials that are used for the manufacture of plaster mesh Mahina-TST.

Glass roving or basalt roving, polyester thread and polymer impregnation composition (a mixture that gives glass roving/ basalt roving the necessary alkali resistance). The impregnating composition of the Mahina-TST meshes protects the mesh so that it does not lose its strength characteristics.

Advantages of Mahina-TST construction Grids:

High strength characteristics of building meshes, which is associated with the method of manufacturing the mesh - the basic knitting method. The strengthening of the mesh occurs due to gluing with an impregnating compound, as well as dressing the roving with polyester thread.

Reliable reinforcement of the plaster layer. Reliable reinforcement provides protection against cracking, therefore - the safety of the entire exterior facade insulation system during the service life.

The glass mesh retains its characteristics during service even under active alkaline loads. The products have certificates of compliance with the requirements of the European Union and the Russian Federation.

The price-quality ratio of products.

The company Mahina-TST is a reliable supplier, takes into account all the nuances when ordering, strictly follows the fulfillment of obligations. The production includes modern equipment with high productivity, which allows you to achieve the highest quality of the finished product.